환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

External Machining

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1803)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1792)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1792)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1790)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1790)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1790)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1801)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1803)
    • M Stainless Steel (1779)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1779)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1779)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1779)
    • K Cast Iron (1895)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1895)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1890)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1853)
    • N Non-Ferrous Materials (1772)
      • N1
        Wrought Aluminum (1751)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1751)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(980)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1772)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1751)
      • N6
        Carbon, Graphite Composites, CFRP (1735)
      • N7
        MMC's (1502)
    • S High-Temp Alloys (1869)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1862)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1869)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1862)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1794)
    • H Hardened Materials (1745)
      • H1
        Hardened Materials 44-48 HRC(1745)
      • H2
        Hardened Materials 48-55 HRC(1745)
      • H3
        Hardened Materials 56-60 HRC(1703)
      • H4
        Hardened Materials >60 HRC(1150)
    • C CFRP Materials (1751)
      • C1
        CFRP, CFRP / CFRP (1735)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (1502)
    1차 선택 선택
    • CN (113)
    • DE (111)
    • GB (56)
    • IN (2)
    • SG (16)
    • US (136)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (49)
    • FacingFacing (1225)
    • ID FacingID Facing (2)
    • Multiple Direction CuttingMultiple Direction Cutting (1288)
    • Plunge TurningPlunge Turning (55)
    • ProfilingProfiling (1170)
    • TRN BoringTRN Boring (339)
    • TurningTurning (1783)
    Type of Thread
    Type of Thread
    • 60 (1)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1846)
    • Lightly Interrupted Cut (1889)
    • Smooth Cut (1889)
    • Varying Depth of Cut (1882)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (198)
    • 48.0 (8)
    • 49.783 (2)
    • 50.0 (24)
    • 60.0 (16)
    • 62.5 (27)
    • 63.0 (19)
    • 72.5 (25)
    • 75.0 (293)
    • 85.0 (7)
    • 90.0 (351)
    • 93.0 (448)
    • 95.0 (392)
    • 97.5 (1)
    • 105.0 (1)
    • 107.5 (90)
    • 117.5 (14)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (264)
    • Toolholder (1328)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (66)
    • 1.0 (1070)
    • 2.0 (1078)
    • 3.0 (307)
    • 4.0 (1168)
    • 6.0 (269)
    • 8.0 (739)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.379 in(36)
    • 1.575 in(108)
    • 1.772 in(34)
    • 1.85 in(2)
    • 1.969 in(150)
    • 2.165 in(1)
    • 2.362 in(182)
    • 2.5 in(22)
    • 2.757 in(65)
    • 3.15 in(4)
    • 3.25 in(1)
    • 3.446 in(2)
    • 3.5 in(34)
    • 3.661 in(2)
    • 3.681 in(2)
    • 3.74 in(2)
    • 3.781 in(2)
    • 3.819 in(6)
    • 3.858 in(2)
    • 3.918 in(2)
    • 3.938 in(49)
    • 4.0 in(29)
    • 4.055 in(2)
    • 4.094 in(2)
    • 4.134 in(2)
    • 4.154 in(2)
    • 4.213 in(2)
    • 4.252 in(2)
    • 4.291 in(8)
    • 4.331 in(2)
    • 4.5 in(117)
    • 4.529 in(10)
    • 4.567 in(2)
    • 4.764 in(2)
    • 4.921 in(107)
    • 5.0 in(65)
    • 5.571 in(2)
    • 5.579 in(2)
    • 5.906 in(229)
    • 5.955 in(3)
    • 6.0 in(393)
    • 6.299 in(21)
    • 6.367 in(4)
    • 6.694 in(130)
    • 6.732 in(1)
    • 6.742 in(9)
    • 6.791 in(2)
    • 7.0 in(26)
    • 7.875 in(5)
    • 8.0 in(10)
    • 9.843 in(16)
    • 18.0 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 35.0 mm(36)
    • 40.0 mm(108)
    • 45.0 mm(34)
    • 47.0 mm(2)
    • 50.0 mm(150)
    • 55.0 mm(1)
    • 60.0 mm(182)
    • 63.5 mm(22)
    • 70.0 mm(65)
    • 80.0 mm(4)
    • 82.551 mm(1)
    • 87.5 mm(2)
    • 88.9 mm(34)
    • 93.0 mm(2)
    • 93.5 mm(2)
    • 95.0 mm(2)
    • 96.0 mm(2)
    • 97.0 mm(6)
    • 98.0 mm(2)
    • 99.5 mm(2)
    • 100.0 mm(49)
    • 101.601 mm(29)
    • 103.0 mm(2)
    • 104.0 mm(2)
    • 105.0 mm(2)
    • 105.5 mm(2)
    • 107.0 mm(2)
    • 108.0 mm(2)
    • 109.0 mm(8)
    • 110.0 mm(2)
    • 114.301 mm(117)
    • 115.0 mm(10)
    • 116.0 mm(2)
    • 121.0 mm(2)
    • 125.0 mm(107)
    • 127.0 mm(65)
    • 141.5 mm(2)
    • 141.701 mm(2)
    • 150.0 mm(229)
    • 151.25 mm(3)
    • 152.4 mm(393)
    • 160.0 mm(21)
    • 161.701 mm(4)
    • 170.0 mm(128)
    • 170.025 mm(2)
    • 171.0 mm(1)
    • 171.25 mm(9)
    • 172.5 mm(2)
    • 177.8 mm(26)
    • 200.0 mm(5)
    • 203.201 mm(10)
    • 250.0 mm(16)
    • 457.201 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(89)
    • 0.001 in(198)
    • 0.002 in(272)
    • 0.004 in(998)
    • 0.008 in(940)
    • 0.014 in(122)
    • 0.016 in(1463)
    • 0.024 in(63)
    • 0.031 in(1722)
    • -0.039 in(66)
    • 0.047 in(1586)
    • 0.062 in(166)
    • 0.063 in(1217)
    • 0.078 in(7)
    • 0.079 in(7)
    • 0.094 in(196)
    • 0.095 in(600)
    • 0.119 in(1)
    • 0.125 in(82)
    • 0.126 in(266)
    • 0.157 in(66)
    • 0.187 in(13)
    • 0.188 in(21)
    • 0.197 in(11)
    • 0.237 in(11)
    • 0.25 in(59)
    • 0.313 in(3)
    • 0.315 in(5)
    • 0.375 in(7)
    • 0.394 in(4)
    • 0.492 in(6)
    • 0.5 in(3)
    • 0.63 in(2)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(89)
    • 0.025 mm(198)
    • 0.05 mm(272)
    • 0.1 mm(998)
    • 0.2 mm(940)
    • 0.351 mm(122)
    • 0.4 mm(1463)
    • 0.601 mm(63)
    • 0.8 mm(1722)
    • -1.0 mm(66)
    • 1.201 mm(1586)
    • 1.576 mm(166)
    • 1.6 mm(1217)
    • 1.975 mm(7)
    • 2.0 mm(7)
    • 2.375 mm(196)
    • 2.401 mm(600)
    • 3.0 mm(1)
    • 3.176 mm(82)
    • 3.2 mm(266)
    • 4.0 mm(66)
    • 4.75 mm(13)
    • 4.775 mm(21)
    • 5.0 mm(11)
    • 6.0 mm(11)
    • 6.351 mm(59)
    • 7.95 mm(3)
    • 8.0 mm(5)
    • 9.525 mm(7)
    • 10.0 mm(4)
    • 12.5 mm(6)
    • 12.701 mm(3)
    • 16.0 mm(2)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (962)
    • 241 (166)
    • AC5 (66)
    • CG4 (37)
    • CL4 (633)
    • CM2 (924)
    • CM3 (792)
    • CM4 (478)
    • CM5 (61)
    • CPX (885)
    • CW2 (362)
    • CW2015 (323)
    • CW3020 (15)
    • CW5025 (360)
    • GH1 (59)
    • GH2 (7)
    • GX (561)
    • HCK10 (23)
    • HK1500 (255)
    • HK35 (28)
    • HT2 (639)
    • HTX (528)
    • HWK10 (1)
    • HWK15 (25)
    • K060 (525)
    • K090 (1219)
    • K1 (440)
    • K1010P (59)
    • K10M (1312)
    • K10P (1156)
    • K10U (1115)
    • K11 (25)
    • K15U (1090)
    • K20K (1315)
    • K21 (645)
    • K25M (1111)
    • K25P (1137)
    • K2884 (13)
    • K2885 (52)
    • K313 (1703)
    • K35P (696)
    • K420 (998)
    • K45 (679)
    • K6 (70)
    • K68 (1564)
    • K8 (6)
    • K8735 (20)
    • KB1340 (390)
    • KB1345 (449)
    • KB1610 (848)
    • KB1625 (666)
    • KB1630 (554)
    • KB5610 (663)
    • KB5625 (782)
    • KB5630 (555)
    • KB9610 (998)
    • KB9640 (477)
    • KBH10 (986)
    • KBH10B (540)
    • KBH20 (1037)
    • KBH20B (540)
    • KBK35 (195)
    • KBK45 (31)
    • KC210 (765)
    • KC250 (764)
    • KC5010 (1765)
    • KC5020P (169)
    • KC5025 (1564)
    • KC5410 (1414)
    • KC5510 (1176)
    • KC5525 (608)
    • KC710 (271)
    • KC720 (1253)
    • KC722 (166)
    • KC730 (1529)
    • KC7310 (1247)
    • KC732 (1201)
    • KC735M (19)
    • KC740 (20)
    • KC8050 (1750)
    • KC810 (1632)
    • KC850 (1757)
    • KC9010 (1401)
    • KC9025 (1680)
    • KC910 (1617)
    • KC9105 (1435)
    • KC9110 (1727)
    • KC9120 (1502)
    • KC9125 (1654)
    • KC9125RR (139)
    • KC9140 (1267)
    • KC9145 (1067)
    • KC9210 (122)
    • KC9215 (1177)
    • KC9225 (1540)
    • KC9240 (1623)
    • KC9240NEW (1616)
    • KC9245 (1181)
    • KC9315 (1700)
    • KC9320 (1559)
    • KC9325 (1425)
    • KC935 (1663)
    • KC950 (1533)
    • KC990 (1572)
    • KCD25 (433)
    • KCK05 (1542)
    • KCK05B (1339)
    • KCK15 (1463)
    • KCK15B (1568)
    • KCK20 (1603)
    • KCK20B (1593)
    • KCM15 (1507)
    • KCM15B (1377)
    • KCM25 (1602)
    • KCM25B (1527)
    • KCM25S (155)
    • KCM35 (1382)
    • KCM35B (1003)
    • KCP05 (1326)
    • KCP05B (983)
    • KCP10 (1639)
    • KCP10B (1649)
    • KCP15 (38)
    • KCP20S (155)
    • KCP25 (1685)
    • KCP25B (1702)
    • KCP25C (1758)
    • KCP30 (1631)
    • KCP30B (1132)
    • KCP40 (1035)
    • KCP40B (1211)
    • KCPK05 (1158)
    • KCS10 (592)
    • KCS10B (1472)
    • KCS25S (155)
    • KCU10 (1717)
    • KCU10B (1735)
    • KCU25 (1556)
    • KCU25B (1561)
    • KD050 (816)
    • KD081 (787)
    • KD100 (496)
    • KD105 (23)
    • KD120 (723)
    • KD1400 (780)
    • KD1405 (439)
    • KD1425 (832)
    • KD200 (9)
    • KD230 (9)
    • KD240 (9)
    • KM1 (560)
    • KMF (186)
    • KN10S (198)
    • KS15 (166)
    • KT1120 (171)
    • KT125 (882)
    • KT150 (642)
    • KT175 (1060)
    • KT315 (1259)
    • KT325 (723)
    • KT5020 (167)
    • KTP10 (1137)
    • KTP25S (893)
    • KU10 (279)
    • KU10T (1232)
    • KU30T (1566)
    • KY1310 (792)
    • KY1320 (1101)
    • KY1525 (66)
    • KY1540 (640)
    • KY1615 (1164)
    • KY2000 (738)
    • KY2100 (436)
    • KY2200 (7)
    • KY3000 (1129)
    • KY3400 (963)
    • KY3500 (1183)
    • KY4000 (524)
    • KY4300 (535)
    • KY4400 (1100)
    • KYHK15B (1142)
    • KYK10 (634)
    • KYK25 (899)
    • KYK35 (1179)
    • KYS25 (549)
    • KYS30 (612)
    • MC2 (87)
    • MC3 (18)
    • NL200 (288)
    • NL250 (1134)
    • NL300 (879)
    • NL400 (411)
    • NL920 (801)
    • P10 (28)
    • P20 (20)
    • P25 (407)
    • P2F (52)
    • PB100 (59)
    • PB170 (53)
    • PB250 (66)
    • PB300 (39)
    • PD100 (22)
    • PD50 (20)
    • PS5 (345)
    • SF30 (19)
    • SP0819 (757)
    • SP0A00 (74)
    • SP0G00 (3)
    • SP0NTA (1)
    • SP0PW3 (7)
    • SP3019 (721)
    • SP4019 (733)
    • SP4036 (93)
    • SP4093 (93)
    • SP4200 (20)
    • SP61EJ (131)
    • SP7779 (7)
    • SPADAP (150)
    • SPB400 (24)
    • SPMQMA (4)
    • SPN3W1 (2)
    • SPN4W2 (23)
    • SPSREJ (45)
    • THM (226)
    • THM-X (175)
    • THMF-X (112)
    • TN10P (398)
    • TN10U (321)
    • TN15M (392)
    • TN15U (305)
    • TN2000 (286)
    • TN20K (426)
    • TN20P (448)
    • TN30M (414)
    • TN30P (343)
    • TN4000 (269)
    • TN5015 (386)
    • TN5020 (348)
    • TN5105 (304)
    • TN5120 (388)
    • TN6010 (204)
    • TN6025 (220)
    • TN7005 (207)
    • TN7010 (414)
    • TN7015 (426)
    • TN7025 (423)
    • TN7035 (424)
    • TN7105 (215)
    • TN7110 (369)
    • TN7115 (401)
    • TN7125 (386)
    • TN7135 (352)
    • TN8025 (392)
    • TTI15 (151)
    • TTM (17)
    • TTM09 (133)
    • TTR (145)
    • TTR-X (23)
    • TTS (219)
    • TTX (195)
    • W00342 (49)
    • WBH10C (261)
    • WBH10P (129)
    • WBH10U (221)
    • WBH20P (291)
    • WBH25P (202)
    • WBH25U (237)
    • WBH30P (129)
    • WBK40U (123)
    • WBK45U (189)
    • WDN00U (78)
    • WDN25U (177)
    • WK05CT (441)
    • WK15CT (258)
    • WK20CT (458)
    • WM15CT (436)
    • WM25CT (449)
    • WM35CT (398)
    • WP05CT (58)
    • WP15CT (467)
    • WP20TT (35)
    • WP25CT (467)
    • WP35CT (458)
    • WS10PT (411)
    • WS25PT (425)
    • WU05PT (30)
    • WU10HT (414)
    • WU10PT (291)
    • WU25PT (291)
    • X00511 (166)
    • X00580 (166)
    • X00581 (166)
    • X00582 (166)
    • X00583 (166)
    • X00584 (166)
    • X00585 (166)
    • X00586 (166)
    • X00591 (166)
    • X00592 (166)
    • X00593 (166)
    • X00594 (166)
    • X00596 (166)
    • X00597 (166)
    • X00599 (166)
    • YY3A00 (16)
    • YY87EL (20)
    • YYMITA (1)
    Hand Of Tool
    Hand Of Tool
    • L (639)
    • N (209)
    • R (744)
    Wiper Insert
    Wiper Insert
    • N (1904)
    • Y (605)
    F Dimension
    F Dimension
    • 0.0 mm(42)
    • 4.0 mm(1)
    • 4.75 mm(3)
    • 5.0 mm(2)
    • 6.0 mm(5)
    • 6.351 mm(7)
    • 7.926 mm(2)
    • 7.95 mm(3)
    • 8.0 mm(8)
    • 9.425 mm(1)
    • 9.525 mm(25)
    • 9.951 mm(1)
    • 10.0 mm(22)
    • 11.0 mm(1)
    • 11.125 mm(1)
    • 11.15 mm(2)
    • 11.675 mm(1)
    • 12.0 mm(23)
    • 12.226 mm(1)
    • 12.25 mm(1)
    • 12.5 mm(23)
    • 12.601 mm(5)
    • 12.625 mm(1)
    • 12.701 mm(65)
    • 13.0 mm(5)
    • 13.65 mm(2)
    • 13.75 mm(1)
    • 13.775 mm(2)
    • 13.925 mm(1)
    • 13.951 mm(1)
    • 14.0 mm(1)
    • 14.275 mm(1)
    • 14.425 mm(1)
    • 15.0 mm(1)
    • 15.5 mm(2)
    • 15.775 mm(2)
    • 15.8 mm(1)
    • 15.875 mm(48)
    • 16.0 mm(32)
    • 16.5 mm(2)
    • 16.825 mm(1)
    • 17.0 mm(5)
    • 17.026 mm(2)
    • 17.1 mm(1)
    • 17.25 mm(1)
    • 17.475 mm(1)
    • 17.5 mm(2)
    • 17.776 mm(1)
    • 18.5 mm(2)
    • 18.95 mm(2)
    • 19.05 mm(29)
    • 19.075 mm(2)
    • 19.175 mm(1)
    • 19.5 mm(1)
    • 19.675 mm(1)
    • 19.701 mm(1)
    • 19.875 mm(3)
    • 20.0 mm(41)
    • 20.175 mm(1)
    • 20.5 mm(3)
    • 20.651 mm(1)
    • 21.026 mm(2)
    • 21.076 mm(2)
    • 22.0 mm(31)
    • 22.225 mm(7)
    • 22.3 mm(1)
    • 22.35 mm(2)
    • 23.151 mm(2)
    • 23.175 mm(5)
    • 23.701 mm(1)
    • 24.0 mm(11)
    • 24.25 mm(2)
    • 25.0 mm(93)
    • 25.201 mm(2)
    • 25.401 mm(83)
    • 25.5 mm(1)
    • 25.901 mm(5)
    • 26.0 mm(1)
    • 26.425 mm(1)
    • 26.625 mm(2)
    • 26.925 mm(2)
    • 27.0 mm(69)
    • 27.375 mm(2)
    • 28.026 mm(2)
    • 28.576 mm(6)
    • 28.651 mm(2)
    • 28.701 mm(3)
    • 29.725 mm(4)
    • 30.0 mm(19)
    • 31.75 mm(181)
    • 31.776 mm(6)
    • 32.0 mm(254)
    • 32.25 mm(6)
    • 32.275 mm(1)
    • 32.5 mm(1)
    • 33.551 mm(2)
    • 34.375 mm(2)
    • 35.0 mm(38)
    • 35.25 mm(1)
    • 38.0 mm(18)
    • 38.1 mm(81)
    • 38.125 mm(4)
    • 38.375 mm(2)
    • 38.6 mm(2)
    • 40.0 mm(37)
    • 40.5 mm(8)
    • 43.0 mm(39)
    • 44.95 mm(1)
    • 46.25 mm(3)
    • 48.0 mm(9)
    • 50.0 mm(9)
    • 50.801 mm(43)
    • 50.825 mm(1)
    • 53.0 mm(23)
    • 57.151 mm(1)
    • 57.651 mm(1)
    • 59.0 mm(2)
    • 63.5 mm(2)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(42)
    • 0.157 in(1)
    • 0.187 in(3)
    • 0.197 in(2)
    • 0.237 in(5)
    • 0.25 in(7)
    • 0.312 in(2)
    • 0.313 in(3)
    • 0.315 in(8)
    • 0.371 in(1)
    • 0.375 in(25)
    • 0.392 in(1)
    • 0.394 in(22)
    • 0.433 in(1)
    • 0.438 in(1)
    • 0.439 in(2)
    • 0.46 in(1)
    • 0.473 in(23)
    • 0.481 in(1)
    • 0.482 in(1)
    • 0.492 in(23)
    • 0.496 in(5)
    • 0.497 in(1)
    • 0.5 in(65)
    • 0.512 in(5)
    • 0.537 in(2)
    • 0.541 in(1)
    • 0.542 in(2)
    • 0.548 in(1)
    • 0.549 in(1)
    • 0.551 in(1)
    • 0.562 in(1)
    • 0.569 in(1)
    • 0.591 in(1)
    • 0.61 in(2)
    • 0.621 in(2)
    • 0.622 in(1)
    • 0.625 in(48)
    • 0.63 in(32)
    • 0.65 in(2)
    • 0.662 in(1)
    • 0.669 in(5)
    • 0.67 in(2)
    • 0.673 in(1)
    • 0.679 in(1)
    • 0.689 in(1)
    • 0.69 in(2)
    • 0.701 in(1)
    • 0.728 in(2)
    • 0.746 in(2)
    • 0.75 in(29)
    • 0.751 in(2)
    • 0.755 in(1)
    • 0.768 in(1)
    • 0.775 in(1)
    • 0.776 in(1)
    • 0.782 in(3)
    • 0.787 in(41)
    • 0.794 in(1)
    • 0.807 in(3)
    • 0.814 in(1)
    • 0.829 in(2)
    • 0.831 in(2)
    • 0.866 in(31)
    • 0.875 in(7)
    • 0.878 in(1)
    • 0.88 in(2)
    • 0.911 in(2)
    • 0.912 in(5)
    • 0.933 in(1)
    • 0.946 in(11)
    • 0.956 in(2)
    • 0.984 in(93)
    • 0.992 in(2)
    • 1.0 in(83)
    • 1.004 in(1)
    • 1.02 in(5)
    • 1.024 in(1)
    • 1.04 in(1)
    • 1.048 in(2)
    • 1.06 in(2)
    • 1.063 in(69)
    • 1.078 in(2)
    • 1.103 in(2)
    • 1.125 in(6)
    • 1.129 in(2)
    • 1.131 in(3)
    • 1.17 in(4)
    • 1.181 in(19)
    • 1.25 in(181)
    • 1.252 in(6)
    • 1.26 in(254)
    • 1.27 in(6)
    • 1.272 in(1)
    • 1.28 in(1)
    • 1.321 in(2)
    • 1.353 in(2)
    • 1.379 in(38)
    • 1.389 in(1)
    • 1.496 in(18)
    • 1.5 in(81)
    • 1.502 in(4)
    • 1.512 in(2)
    • 1.52 in(2)
    • 1.575 in(37)
    • 1.594 in(8)
    • 1.693 in(39)
    • 1.77 in(1)
    • 1.821 in(3)
    • 1.891 in(9)
    • 1.969 in(9)
    • 2.0 in(43)
    • 2.001 in(1)
    • 2.087 in(23)
    • 2.25 in(1)
    • 2.27 in(1)
    • 2.323 in(2)
    • 2.5 in(2)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -1.0 mm(60)
    • 16.0 mm(1)
    • 40.0 mm(4)
    • 44.0 mm(12)
    • 50.0 mm(30)
    • 54.0 mm(30)
    • 60.0 mm(2)
    • 63.0 mm(16)
    • 70.0 mm(38)
    • 74.0 mm(4)
    • 80.0 mm(51)
    • 86.0 mm(68)
    • 90.0 mm(6)
    • 94.0 mm(2)
    • 100.0 mm(37)
    • 104.0 mm(2)
    • 106.0 mm(32)
    • 118.0 mm(2)
    • 120.0 mm(2)
    • 150.0 mm(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • -0.039 in(60)
    • 0.63 in(1)
    • 1.575 in(4)
    • 1.732 in(12)
    • 1.969 in(30)
    • 2.126 in(30)
    • 2.362 in(2)
    • 2.48 in(16)
    • 2.757 in(38)
    • 2.914 in(4)
    • 3.15 in(51)
    • 3.386 in(68)
    • 3.543 in(6)
    • 3.701 in(2)
    • 3.938 in(37)
    • 4.094 in(2)
    • 4.173 in(32)
    • 4.646 in(2)
    • 4.724 in(2)
    • 5.906 in(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(66)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(66)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (378)
    • E (203)
    • S (1011)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (872)
    • DOUBLE POSITIVE (36)
    • NEGATIVE-ZERO (156)
    • NEUTRAL (ZERO) (397)
    • POSITIVE-ZERO (65)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.379 in(20)
    • 1.575 in(63)
    • 1.772 in(16)
    • 1.891 in(1)
    • 1.969 in(88)
    • 2.165 in(1)
    • 2.362 in(103)
    • 2.757 in(40)
    • 4.529 in(8)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.0 mm(20)
    • 40.0 mm(63)
    • 45.0 mm(16)
    • 48.0 mm(1)
    • 50.0 mm(88)
    • 55.0 mm(1)
    • 60.0 mm(103)
    • 70.0 mm(40)
    • 115.0 mm(8)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (13)
    frontEnd
    Clamp Style
    Clamp Style
    • C (166)
    • D (270)
    • M (710)
    • N (35)
    • P (304)
    • S (408)
    • W (8)
    • X (15)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (497)
    • D-DIAMOND/RHOMBIC 55 (385)
    • E-DIAMOND/RHOMBIC 75 (1)
    • R-ROUND (161)
    • S-SQUARE 90 (321)
    • T-TRIANGLE 60 (260)
    • V-DIAMOND/RHOMBIC 35 (192)
    • W-TRIGON 80 (99)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.25 in(3)
    • 0.276 in(3)
    • 0.309 in(2)
    • 0.315 in(2)
    • 0.4 in(2)
    • 0.411 in(1)
    • 0.43 in(2)
    • 0.465 in(2)
    • 0.473 in(1)
    • 0.478 in(2)
    • 0.501 in(2)
    • 0.625 in(1)
    • 0.63 in(5)
    • 0.748 in(1)
    • 0.75 in(4)
    • 0.787 in(4)
    • 0.81 in(3)
    • 0.946 in(2)
    • 0.984 in(4)
    • 1.0 in(15)
    • 1.02 in(4)
    • 1.131 in(1)
    • 1.143 in(1)
    • 1.25 in(3)
    • 1.26 in(1)
    • 1.299 in(2)
    • 1.381 in(5)
    • 1.496 in(2)
    • 1.5 in(4)
    • 1.581 in(2)
    • 1.863 in(1)
    • 1.875 in(2)
    • 2.323 in(1)
    • 2.364 in(1)
    • 2.374 in(1)
    • 3.071 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 6.351 mm(3)
    • 7.0 mm(3)
    • 7.851 mm(2)
    • 8.0 mm(2)
    • 10.15 mm(2)
    • 10.425 mm(1)
    • 10.925 mm(2)
    • 11.8 mm(2)
    • 12.0 mm(1)
    • 12.125 mm(2)
    • 12.726 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(5)
    • 19.0 mm(1)
    • 19.05 mm(4)
    • 20.0 mm(4)
    • 20.576 mm(3)
    • 24.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(15)
    • 25.901 mm(4)
    • 28.701 mm(1)
    • 29.0 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(1)
    • 33.0 mm(2)
    • 35.051 mm(5)
    • 38.0 mm(2)
    • 38.1 mm(4)
    • 40.151 mm(2)
    • 47.325 mm(1)
    • 47.625 mm(2)
    • 59.0 mm(1)
    • 60.051 mm(1)
    • 60.301 mm(1)
    • 78.0 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (1213)
    • B L (1144)
    • C A (1351)
    • C N (1301)
    • D P (1000)
    • H T (1362)
    • H W (1844)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (1328)
    • TAPER SHANK (264)
    System Size
    System Size
    • KM32 (15)
    • KM32TS (6)
    • KM40TS (67)
    • KM50TS (57)
    • KM63TS (79)
    • KM63UT (1)
    • KM80TS (39)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(1)
    • 32.0 mm(41)
    • 40.0 mm(146)
    • 50.0 mm(148)
    • 63.0 mm(186)
    • 80.0 mm(67)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(1)
    • 1.26 in(41)
    • 1.575 in(146)
    • 1.969 in(148)
    • 2.48 in(186)
    • 3.15 in(67)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.313 in(2)
    • 0.315 in(1)
    • 0.375 in(34)
    • 0.394 in(10)
    • 0.473 in(36)
    • 0.5 in(72)
    • 0.625 in(43)
    • 0.63 in(57)
    • 0.75 in(99)
    • 0.787 in(123)
    • 0.984 in(236)
    • 1.0 in(244)
    • 1.25 in(140)
    • 1.26 in(146)
    • 1.5 in(61)
    • 1.575 in(21)
    • 2.0 in(3)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 7.95 mm(2)
    • 8.0 mm(1)
    • 9.525 mm(34)
    • 10.0 mm(10)
    • 12.0 mm(36)
    • 12.701 mm(72)
    • 15.875 mm(43)
    • 16.0 mm(57)
    • 19.05 mm(99)
    • 20.0 mm(123)
    • 25.0 mm(236)
    • 25.401 mm(244)
    • 31.75 mm(140)
    • 32.0 mm(146)
    • 38.1 mm(61)
    • 40.0 mm(21)
    • 50.801 mm(3)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.313 in(2)
    • 0.315 in(1)
    • 0.375 in(34)
    • 0.394 in(11)
    • 0.473 in(36)
    • 0.5 in(73)
    • 0.551 in(1)
    • 0.625 in(44)
    • 0.63 in(57)
    • 0.709 in(1)
    • 0.75 in(102)
    • 0.787 in(122)
    • 0.984 in(317)
    • 1.0 in(260)
    • 1.25 in(122)
    • 1.26 in(65)
    • 1.5 in(58)
    • 1.575 in(19)
    • 2.0 in(3)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 7.95 mm(2)
    • 8.0 mm(1)
    • 9.525 mm(34)
    • 10.0 mm(11)
    • 12.0 mm(36)
    • 12.701 mm(73)
    • 14.0 mm(1)
    • 15.875 mm(44)
    • 16.0 mm(57)
    • 18.0 mm(1)
    • 19.05 mm(102)
    • 20.0 mm(122)
    • 25.0 mm(317)
    • 25.401 mm(260)
    • 31.75 mm(122)
    • 32.0 mm(65)
    • 38.1 mm(58)
    • 40.0 mm(19)
    • 50.801 mm(3)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    Kenloc™ • M 스타일 클램핑 • 네거티브 스타일 인서트용
    (685)

    Kenloc™ • M 스타일 클램핑 • 네거티브 스타일 인서트용

    스크류 온 • S 스타일 클램핑 • 포지티브 스타일 인서트
    (392)

    스크류 온 • S 스타일 클램핑 • 포지티브 스타일 인서트

    Kenlever™ • P 스타일 클램핑 • 네거티브 스타일 인서트용
    (274)

    Kenlever™ • P 스타일 클램핑 • 네거티브 스타일 인서트용

    Kenclamp™ • D 스타일 클램핑 • 네거티브 스타일 인서트용
    (272)

    Kenclamp™ • D 스타일 클램핑 • 네거티브 스타일 인서트용

    Kendex™ • C 스타일 클램핑 • Kendex 스타일 인서트용
    (103)

    Kendex™ • C 스타일 클램핑 • Kendex 스타일 인서트용

    Top Notch • C 스타일 클램핑 • 세라믹 인서트용
    (81)

    Top Notch • C 스타일 클램핑 • 세라믹 인서트용

    관통 절삭유를 사용하는 공구 홀더
    (48)

    관통 절삭유를 사용하는 공구 홀더

    Wedgelock
    (23)

    Wedgelock

    V-바텀
    (17)

    V-바텀

    Fix-Perfect
    (15)

    Fix-Perfect

    포지티브 프로파일링
    (6)

    포지티브 프로파일링

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?