KDMB • Ball Nose Finisher • Necked End Mills • Carbide • Inch
Indexable Ball Nose Finisher
제품 번호2879411
ISO 카탈로그 IDKDMB1000R630A100HNCANSI 카탈로그 IDKDMB1000R630A100HNC
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
- H Hardened Materials
- 램핑: 블랭크
- 슬로팅: 볼 노즈
- 사이드 밀링/숄더 밀링: 볼 노즈
- 3D 프로파일링
- 섕크 — 원통형 일반
- 포켓팅
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
제품 번호 | 2879411 |
ISO 카탈로그 ID | KDMB1000R630A100HNC |
ANSI 카탈로그 ID | KDMB1000R630A100HNC |
[D1] Effective Cutting Diameter | 25.4 mm |
[D1] Effective Cutting Diameter | 1 in |
[D] Adapter / Shank / Bore Diameter | 25.4 mm |
[D] Adapter / Shank / Bore Diameter | 1 in |
[D3] Neck Diameter | 22.61 mm |
[D3] Neck Diameter | .89 in |
[L] Overall Length | 160.2 mm |
[L] Overall Length | 6.307 in |
[L2] Head Length | 60.2 mm |
[L2] Head Length | 2.37 in |
[AP1MAX] 1st Maximum Cutting Depth | 9.525 mm |
[AP1MAX] 1st Maximum Cutting Depth | .375 in |
Number of Inserts | 1 |
[Z] Number of Flutes | 2 |
Coolant Supply | Y |
Maximum Ramping Angle | 3 |
Max RPM | 30000 |
Gage Insert | KDMB1000. |
Weight Pounds | 2.01 |
공작물 재료
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
- Hardened Materials
사용 및 응용 분야
- 램핑: 블랭크
- 슬로팅: 볼 노즈
- 사이드 밀링/숄더 밀링: 볼 노즈
- 3D 프로파일링
- 섕크 — 원통형 일반
- 포켓팅
특징 및 장점
- Available diameters: .250–1.250".
- Ball nose finishers for 3D milling applications.
- Suitable for roughing and finishing operations.
- High precision and runout accuracy.
- Can be used with heat shrink technology, h6 shank tolerance.
이송 및 속도를 계산하려면 솔루션을 생성하세요.
솔루션 생성 후 이송 및 속도 아이콘을 선택하면 추천 값이 제공됩니다. 기계와 사양을 추가하여 사용자 정보를 지정하거나 슬라이더를 사용하여 조정할 수 있습니다.
인서트 선택
KDMB Ball Nose Platform • .250"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
P3–P4 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
P5–P6 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
M1–M2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
M3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K1–K2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | .E..GP | KC515M | – | – |
H1 | .E..GP | KC515M | .E..GP | KC515M | – | – |
KDMB Ball Nose Platform • .312"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
M1–M2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
M3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K1–K2 | .E..GP | KC515M | – | – | – | – |
K3 | .E..GP | KC515M | – | – | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | – | – |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GP | KC515M |
KDMB Ball Nose Platform • .375"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
M1–M2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
M3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K1–K2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | – | – |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GP | KC515M |
KDMB Ball Nose Platform • .500"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC515M |
KDMB Ball Nose Platform • .625"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GP | KC515M |
KDMB Ball Nose Platform • .750"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC515M |
KDMB Ball Nose Platform • 1.00"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..HC | KC530M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..HC | KC530M |
M1–M2 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
M3 | .E..GP | KC515M | .E..HC | KC530M | .E..HC | KC530M |
K1–K2 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
K3 | .E..GP | KC515M | .E..GN | KC515M | .E..GN | KC515M |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | .E..HC | KC530M |
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GN | KC515M |
KDMB Ball Nose Platform • 1.25"
소재 그룹 | 경절삭 | 범용 | 중황삭 | |||
– | (경절삭용 형상) | – | (중절삭용 형상) | |||
– | 내마모성 | 인성 | ||||
– | 형상 | 재종 | 형상 | 재종 | 형상 | 재종 |
P1–P2 | .E..GP | KC515M | .E..GP | KC515M | .E..GP | KC515M |
P3–P4 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
P5–P6 | .E..GP | KC505M | .E..GP | KC515M | .E..GP | KC515M |
M1–M2 | .E..GP | KC515M | .E..GP | KC515M | – | – |
M3 | .E..GP | KC515M | .E..GP | KC515M | – | – |
K1–K2 | .E..GP | KC515M | – | – | – | – |
K3 | .E..GP | KC515M | – | – | – | – |
N1–N2 | .E..LD | K115M | .E..LD | K115M | – | – |
N3 | .E..LD | K115M | .E..LD | K115M | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | .E..LD | K115M | .E..GP | KC515M | ||
H1 | .E..GP | KC505M | .E..GP | KC505M | .E..GP | KC515M |
이송량
KDMB Ball Nose • .250"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.125 | 0.050 | 0.025 | 0.013 |
0.250 | 0.250 | 0.200 | 0.150 | 0.109 |
At .125 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
At .050 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .025 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
At .013 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .006 | .008 | .015 | .004 | .006 | .011 | .004 | .005 | .010 | .004 | .005 | .009 | .004 | .005 | .009 | .E..LD |
.E..GP | .006 | .008 | .015 | .004 | .006 | .011 | .004 | .005 | .010 | .004 | .005 | .009 | .004 | .005 | .009 | .E..GP |
KDMB Ball Nose • .312"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.156 | 0.047 | 0.031 | 0.016 |
0.313 | 0.313 | 0.223 | 0.188 | 0.136 |
At .156 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
At .047 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .031 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
At .016 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
KDMB Ball Nose • .375"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.188 | 0.056 | 0.038 | 0.019 |
0.375 | 0.375 | 0.268 | 0.225 | 0.163 |
At .188 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
At .056 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .038 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
At .019 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
KDMB Ball Nose • .500"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.250 | 0.075 | 0.050 | 0.025 |
0.500 | 0.500 | 0.357 | 0.300 | 0.218 |
At .250 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
.E..GN | .007 | .010 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .006 | .011 | .004 | .006 | .011 | .E..GN |
.E..HC | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .015 | .004 | .008 | .014 | .004 | .008 | .014 | .E..HC |
At .075 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .050 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
.E..GN | .016 | .024 | .042 | .012 | .017 | .031 | .010 | .015 | .026 | .009 | .014 | .025 | .009 | .014 | .024 | .E..GN |
.E..HC | .016 | .032 | .057 | .012 | .023 | .041 | .010 | .020 | .035 | .009 | .019 | .033 | .009 | .018 | .032 | .E..HC |
At .025 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
.E..GN | .009 | .014 | .025 | .007 | .011 | .019 | .006 | .009 | .016 | .006 | .009 | .015 | .006 | .008 | .015 | .E..GN |
.E..HC | .009 | .019 | .034 | .007 | .014 | .025 | .006 | .012 | .021 | .006 | .011 | .020 | .006 | .011 | .020 | .E..HC |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
.E..GN | .011 | .017 | .030 | .008 | .013 | .022 | .007 | .011 | .019 | .007 | .010 | .018 | .007 | .010 | .018 | .E..GN |
.E..HC | .011 | .023 | .041 | .008 | .017 | .030 | .007 | .015 | .026 | .007 | .014 | .024 | .007 | .013 | .023 | .E..HC |
KDMB Ball Nose • .625"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.313 | 0.094 | 0.063 | 0.031 |
0.625 | 0.625 | 0.446 | 0.375 | 0.272 |
At .313 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
.E..HC | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .015 | .004 | .008 | .014 | .004 | .008 | .014 | .E..HC |
At .094 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
.E..HC | .009 | .019 | .034 | .007 | .014 | .025 | .006 | .012 | .021 | .006 | .011 | .020 | .006 | .011 | .020 | .E..HC |
At .063 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .031 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
.E..HC | .016 | .032 | .057 | .012 | .023 | .041 | .010 | .020 | .035 | .009 | .019 | .033 | .009 | .018 | .032 | .E..HC |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
.E..HC | .011 | .023 | .041 | .008 | .017 | .030 | .007 | .015 | .026 | .007 | .014 | .024 | .007 | .013 | .023 | .E..HC |
KDMB Ball Nose • .750"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.375 | 0.113 | 0.075 | 0.038 |
0.750 | 0.750 | 0.536 | 0.450 | 0.327 |
At .375 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
.E..GN | .007 | .010 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .006 | .011 | .004 | .006 | .011 | .E..GN |
.E..HC | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .015 | .004 | .008 | .014 | .004 | .008 | .014 | .E..HC |
At .113 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .075 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
.E..GN | .009 | .014 | .025 | .007 | .011 | .019 | .006 | .009 | .016 | .006 | .009 | .015 | .006 | .008 | .015 | .E..GN |
.E..HC | .009 | .019 | .034 | .007 | .014 | .025 | .006 | .012 | .021 | .006 | .011 | .020 | .006 | .011 | .020 | .E..HC |
At .038 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
.E..GN | .016 | .024 | .042 | .012 | .017 | .031 | .010 | .015 | .026 | .009 | .014 | .025 | .009 | .014 | .024 | .E..GN |
.E..HC | .016 | .032 | .057 | .012 | .023 | .041 | .010 | .020 | .035 | .009 | .019 | .033 | .009 | .018 | .032 | .E..HC |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
.E..GN | .011 | .017 | .030 | .008 | .013 | .022 | .007 | .011 | .019 | .007 | .010 | .018 | .007 | .010 | .018 | .E..GN |
.E..HC | .011 | .023 | .041 | .008 | .017 | .030 | .007 | .015 | .026 | .007 | .014 | .024 | .007 | .013 | .023 | .E..HC |
KDMB Ball Nose • 1.00"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.500 | 0.150 | 0.100 | 0.050 |
1.000 | 1.000 | 0.714 | 0.600 | 0.436 |
At .500 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
.E..GN | .007 | .010 | .018 | .005 | .008 | .013 | .004 | .007 | .011 | .004 | .006 | .011 | .004 | .006 | .011 | .E..GN |
.E..HC | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .015 | .004 | .008 | .014 | .004 | .008 | .014 | .E..HC |
At .150 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .100 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
.E..GN | .009 | .014 | .025 | .007 | .011 | .019 | .006 | .009 | .016 | .006 | .009 | .015 | .006 | .008 | .015 | .E..GN |
.E..HC | .009 | .019 | .034 | .007 | .014 | .025 | .006 | .012 | .021 | .006 | .011 | .020 | .006 | .011 | .020 | .E..HC |
At .050 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
.E..GN | .016 | .024 | .042 | .012 | .017 | .031 | .010 | .015 | .026 | .009 | .014 | .025 | .009 | .014 | .024 | .E..GN |
.E..HC | .016 | .032 | .057 | .012 | .023 | .041 | .010 | .020 | .035 | .009 | .019 | .033 | .009 | .018 | .032 | .E..HC |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
.E..GN | .011 | .017 | .030 | .008 | .013 | .022 | .007 | .011 | .019 | .007 | .010 | .018 | .007 | .010 | .018 | .E..GN |
.E..HC | .011 | .023 | .041 | .008 | .017 | .030 | .007 | .015 | .026 | .007 | .014 | .024 | .007 | .013 | .023 | .E..HC |
KDMB Ball Nose • 1.25"
축방향 절삭깊이(ap)에서의 가공 직경(Dw) | ||||
D1 max | 0.625 | 0.188 | 0.125 | 0.063 |
1.250 | 1.250 | 0.893 | 0.750 | 0.545 |
At .625 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..LD |
.E..GP | .005 | .007 | .012 | .004 | .005 | .009 | .003 | .004 | .008 | .003 | .004 | .007 | .003 | .004 | .007 | .E..GP |
At .188 Axial Depth of Cut (ap)
경절삭 | 범용 | 중황삭 |
At .125 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..LD |
.E..GP | .011 | .016 | .028 | .008 | .012 | .020 | .007 | .010 | .018 | .007 | .009 | .016 | .006 | .009 | .016 | .E..GP |
At .063 Axial Depth of Cut (ap)
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..LD |
.E..GP | .008 | .011 | .020 | .006 | .008 | .015 | .005 | .007 | .013 | .005 | .007 | .012 | .005 | .007 | .012 | .E..GP |
인서트 형상 | 반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz) | 인서트 형상 | ||||||||||||||
10% | 20% | 30% | 40% | 50–100% | ||||||||||||
.E..LD | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..LD |
.E..GP | .007 | .009 | .017 | .005 | .007 | .012 | .004 | .006 | .011 | .004 | .006 | .010 | .004 | .006 | .010 | .E..GP |
속도
Recommended Starting Speeds [SFM]
소재 그룹 | K115M | KC505M | KC515M | KC530M | |||||||||
P | 1 | – | – | – | – | – | – | 1080 | 960 | 840 | 900 | 780 | 660 |
2 | – | – | – | – | – | – | 1020 | 900 | 780 | 780 | 660 | 540 | |
3 | – | – | – | – | – | – | 900 | 780 | 660 | 660 | 600 | 540 | |
4 | – | – | – | 1180 | 860 | 710 | 780 | 660 | 540 | 600 | 540 | 480 | |
5 | – | – | – | 1180 | 860 | 710 | 660 | 540 | 420 | 540 | 480 | 420 | |
6 | – | – | – | 1140 | 780 | 620 | 540 | 420 | 360 | 420 | 360 | 300 | |
M | 1 | – | – | – | – | – | – | 1080 | 900 | 780 | 900 | 720 | 600 |
2 | – | – | – | – | – | – | 900 | 720 | 540 | 600 | 480 | 420 | |
3 | – | – | – | – | – | – | 720 | 600 | 480 | 480 | 420 | 360 | |
K | 1 | 720 | 600 | 480 | – | – | – | 1440 | 1080 | 720 | – | – | – |
2 | 600 | 480 | 360 | – | – | – | 1080 | 840 | 600 | – | – | – | |
3 | 360 | 300 | 240 | – | – | – | 480 | 360 | 240 | – | – | – | |
N | 1–2 | 1440 | 1080 | 720 | – | – | – | – | – | – | – | – | – |
3 | 960 | 720 | 600 | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | 300 | 230 | 160 | – | – | – | – | – | – | 260 | 200 | 170 | |
H | 1 | – | – | – | 860 | 670 | 550 | 550 | 400 | 310 | – | – | – |
I have read and accepted the Terms & Conditions of use