Mill 1-18™ • Carbide Insert • EDPT-GD • Medium Machining
Shoulder milling insert with two cutting edges per insert
제품 번호2271121
ISO 카탈로그 IDEDPT180508PDERGDANSI 카탈로그 IDEP1808E
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
제품 번호 | 2271121 |
ISO 카탈로그 ID | EDPT180508PDERGD |
ANSI 카탈로그 ID | EP1808E |
Grade | KC715M |
[LI] Insert Length | 21.76 mm |
[LI] Insert Length | .857 in |
[L10] Insert Cutting Edge Length | 18.61 mm |
[L10] Insert Cutting Edge Length | .733 in |
[S] Insert Thickness | 5.5 mm |
[S] Insert Thickness | .2165 in |
[W] Insert Width | 10.97 mm |
[W] Insert Width | .432 in |
[BS] Corner Facet Length | 2.69 mm |
[BS] Corner Facet Length | .106 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | .0312 in |
Average Chip Thickness [HM] | 0.089 mm |
Average Chip Thickness [HM] | .0035 in |
Cutting Edges per Insert | 2 |
특징 및 장점
- Pressed-to-size, for lowest cost per cutting edge.
이송 및 속도를 계산하려면 솔루션을 생성하세요.
솔루션 생성 후 이송 및 속도 아이콘을 선택하면 추천 값이 제공됩니다. 기계와 사양을 추가하여 사용자 정보를 지정하거나 슬라이더를 사용하여 조정할 수 있습니다.
인서트 선택
인서트 선택 가이드
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
P3–P4 | .E..GD | KCPK30 | .S..GD | KCPK30 | .E..HD | KCPK30 |
P5–P6 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
M1–M2 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
M3 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
K1–K2 | .E..GD | KCK20B | .E..GD | KCK20B | .S..GD | KCK15 |
K3 | .E..GD | KCK20B | .S..GD | KCK15 | .E..HD | KCPK30 |
N1–N2 | .F..LDJ | KC410M | .E..LDJ | KC422M | .E..LDJ | KC422M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .F..LDJ | KC410M |
S1–S2 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
S3 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
S4 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use